Alimentatore Switching Professionale 1000W 75A

FEATURES

- AC input range selected by switch

- ON/OFF switch

- 2mt flexible cable with shuko

- Assembled with high-quality components

- Very low noise

- Equipped with high-efficiency filters and EMC circuit

- Protections: Short circuit / Overload current and voltage / Over temp.

- High reliability/ Low ripple and low noise

- Built-in remote sense function

- Built-in remote ON-OFF control

- Built-in parallel operation function

- Adjustable output voltage by external control 1-5V  from (20~100%)

- Adjustable output voltage by internal trimmer  (12-14,5 Vdc)

- Forced air cooling by built-in DC fan

IMPORTANT

For safety reasons, we strongly suggest to connect the device to ground earth.

Model	E-SCN-1000
DC Output Voltage	13.8V
Intput Voltage Error	1%
Rated Output Current	75A
Output Current Range	0-75A
Ripple and Noise	240mVp-p
Voltage Adjustment Range	5.0% typical adjustment by potentiometer 20~100% adjustment by 1~5VDC external control
Inlet Stability	0.5%
Tolerance Voltage	1%
DC Output Power	1000W
Efficiency	84,00%
AC Input Voltage range	90 ~ 130VAC / 180 ~ 260VAC selected by switch, 260 ~ 370VDC
Input Current	Fuse 10A/230VAC - Fuse 15A/115VAC
AC Inrush Current	Cold-Start Current: 60A / 230VAC
Leakage Current	3.5mA/240VAC
Overload Protection	110~135% rated output power,Current limiting, delay shut down o/p voltage, re-power on to recover
Over Voltage Protection	110 ~ 135% follow to output set up point, shut down o/p voltage, re-power on to recover
High Temperature	>100℃ / measure by heat sink, near transformer,Shut down o/p voltage, re-power on to recover
Temperature Coefficient	0.04% /℃ (0~50℃)
Start, Rise, Hold Time	800ms, 50ms, 16ms at full load
Vibration	10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Withstand Voltage	I/P-O/P, I/P-FG:1500VAC
Isolation Resistance	I/P-O/P, I/P-FG, 100M Ohms / 500VDC / 25 ℃/ 70% RH
Working Temperature, Humidity	-10℃~+60℃ (Refer to Output Derating Cutve), 20%~90%RH
Storage Temperature, Humidity	20℃~+85℃, 10%~95%RH
MTBF	120Khrs min. MIL-HDBK-217F (25℃ )
Dimension	291x132x68 mm
Weight	2.65 kgs
Special functions	DC voltage adj., Remote sensing, remote control, parallel operation (refer to terminal instruction manual)
Safety Standards	CE
EMC Standards	Meet FCC Part 15J Conduction class A